Synthesis and Synergistic Antimicrobial Efficacy of Covalent Conjugates Composed of Epsilon-Poly-l-lysine and Beta-Lactam Antibiotics.

The increasing severity of problems posed by drug-resistant pathogens has compelled researchers to explore innovative approaches for infection prevention. Among these strategies, conjugation methods stand out for their convenience and high efficacy. In this study, multiple covalent conjugates were synthesized, incorporating the natural antimicrobial peptide epsilon-poly-l-lysine (EPL) and two commonly used ß-lactam antibiotics: penicillin G or ampicillin. Enhanced antimicrobial efficacy against typical Gram-negative pathogens, along with faster kill kinetics compared to combination approaches, was demonstrated by the EPL-Ampicillin covalent conjugates. Their antimicrobial mechanism was also substantiated through SEM and fluorescence tests in this work, confirming the inheritance of membrane-disrupting properties from EPL. Furthermore, the excellent biocompatibility of the raw materials was reserved in the covalent conjugates. This simplified conjugation method holds promise for the development of infection therapeutic drugs and potentially restores the sensitivity of conventional antibiotics to drug-resistant pathogens by introducing membrane-disrupting mechanisms.

Customizing a Hyperbranched Ligand Confers Supported Platinum Nanoclusters with Unexpected Catalytic Activity toward the Reduction of 4-Nitrophenol.

We here show that a dendritic molecule combined with ligand merit confers supported platinum nanoclusters (PtNCs) with unprecedented catalytic performance. Branched polyethylenimine (PEI, Mn = 2000 D) patched on a porous bead is modified with 2-(diphenylphosphino)benzaldehyde (dppb) before being used to mediate a platinum nanoparticle/nanocluster (Pt0). The catalytic activity of Pt0 toward the reduction of 4-nitrophenol (4-NP) is evaluated from the parameter of Pt-normalized rate constant (kc). Optimization of the dppb level along with transformation of the PEI hydrogens into diol or trimethylammonium groups imparts supported Pt0 unprecedented activity (kc = 19.2 L mmol-1 s-1 and turnover frequency (TOF) = 1041 h-1). The supported Pt0 at an extremely low dosage of 0.1 ppm promotes 98% conversion of 4-NP within minutes and is well recyclable. The striking catalytic activity is attributed to the combination of orthogonal ligand properties such as weak ligand nature, catalyst-activating ability, excellent substrate affinity, and effect on PtNC-size mediation of the ligand.

Dendritic Macrosurfactant Assembly for Physical Functionalization of HIPE-Templated Polymers.

High-internal-phase emulsion-templated macroporous polymers (polyHIPEs) have attracted much interest, but their surface functionalization remains a primary concern. Thus, competitive surface functionalization via physical self-assembly of macrosurfactants was reviewed. Dendritic and diblock-copolymer macrosurfactants were tested, and the former appeared to be more topologically competitive in terms of solubility, viscosity, and versatility. In particular, hyperbranched polyethyleneimine (PEI) was transformed into dendritic PEI macrosurfactants through click-like N-alkylation with epoxy compounds. Free-standing PEI macrosurfactants were used as molecular nanocapsules for charge-selective guest encapsulation and robustly dictated the surface of a macroporous polymer through the HIPE technique, in which the macroporous polymer could act as a well-recoverable adsorbent. Metal nanoparticle-loaded PEI macrosurfactants could similarly lead to polyHIPE, whose surface was dictated by its catalytic component. Unlike conventional Pickering stabilizer, PEI macrosurfactant-based metal nanocomposite resulted in open-cellular polyHIPE, rendering the catalytic sites well accessible. The active amino groups on the polyHIPE could also be transformed into functional groups of aminopolycarboxylic acids, which could efficiently eliminate trace and heavy metal species in water.

A two-photon active chevron-shaped type I photoinitiator designed for 3D stereolithography.

We present herein the properties of a highly reactive type I photoinitiator with significant 2PA cross-sections (δ720nm ∼ 90 GM). We demonstrate that this new type of photocleavable system exhibits very efficient two-photon polymerization abilities with performances amplified by more than two orders of magnitude with regards to those of a commercially available type I photoinitiator (Lucirin TPO-L) which is extensively employed for multiphoton 3D stereolithography.

Large-scale preparation of a 3D patchy surface with dissimilar dendritic amphiphiles.

We show here the first example of the large-scale surface decoration of a macroscopic and porous monolith with dissimilar micropatches. Branched polyethylenimine (PEI) is alkylated with poly(propylene glycol) (PPG), leading to a reverse-micelle-like dendritic amphiphile of PEI@PPG. Peralkylation and partial quaternization of the residual amino groups of PEI@PPG produces a cationic dendritic amphiphile of PEI-N+@PPG. The two dendritic amphiphiles jointly stabilize a water-in-oil high-internal-phase emulsion to prepare open-cellular monoliths of macroscopic size, with the monolith pore surface dictated by the cationic and neutral dendritic amphiphiles. The amino groups of the neutral amphiphile are further derivatized into anionic dithiocarbamates. The resulting monolith, along with the dissimilar functional patches on the surface, simultaneously eliminates multiple anionic and cationic micropollutants from water to very low residues, and affords the pH-triggered sequential release. Our strategy of using dissimilar dendritic amphiphiles rather than block copolymers as surface building blocks can confer the resulting surface with robust and predesigned microenvironments besides the conventional coacervate structure, and thus can afford more functions.

Molecular Engineering of UV/Vis Light-Emitting Diode (LED)-Sensitive Donor-π-Acceptor-Type Sulfonium Salt Photoacid Generators: Design, Synthesis, and Study of Photochemical and Photophysical Properties.

A series of donor-π-acceptor-type sulfonium salt photoacid generators (PAGs) were designed and synthesized by systematically changing electron-donating groups, π-conjugated systems, electron-withdrawing groups, and the number of branches through molecular engineering. These PAGs can effectively decompose under UV/Vis irradiation from a light-emitting diode (LED) light source because of the matching absorption and emitting spectra of the LEDs. The absorption and acid-generation properties of these sulfonium salts were elucidated by UV/Vis spectroscopy and so forth. Results indicated that the PAG performance benefited from the introduction of strong electron-donating groups, specific π-conjugated structures, certain electron-withdrawing groups, or two-branched structures. Most sulfonium salts showed potential as photoinitiators under irradiation by a wide variety of UV and visible LEDs.

Supramolecular Nanoparticles via Single-Chain Folding Driven by Ferrous Ions.

Single-chain nanoparticles can be obtained via single-chain folding assisted by intramolecular crosslinking reversibly or irreversibly. Single-chain folding is also an efficient route to simulate biomacromolecules. In present study, poly(N-hydroxyethylacrylamide-co-4'-(propoxy urethane ethyl acrylate)-2,2':6',2''-terpyridine) (P(HEAm-co-EMA-Tpy)) is synthesized via reversible addition fragmentation chain transfer polymerization. Single-chain folding and intramolecular crosslinking of P(HEAm-co-EMA-Tpy) are achieved via metal coordination chemistry. The intramolecular interaction is characterized on ultraviolet/visible spectrophotometer (UV-vis spectroscopy), proton nuclear magnetic resonance ((1)H NMR), and differential scanning calorimetry (DSC). The supramolecular crosslinking mediated by Fe(2+) plays an important role in the intramolecular collapsing of the single-chain and the formation of the nanoparticles. The size and morphology of the nanoparticles can be controlled reversibly via metal coordination chemistry, which can be characterized by dynamic light scattering (DLS), transmission electron microscope (TEM), and atomic force microscope (AFM).

Dendritic Amphiphile Mediated One-Pot Preparation of 3D Pt Nanoparticles-Decorated PolyHIPE as a Durable and Well-Recyclable Catalyst.

Straightforward organization of platinum nanoparticles (PtNPs) onto a macroscopic and robust material is described. PtNPs are in situ produced and stabilized by a dendritic amphiphile, where the latter consists of a hyperbranched polyethylenimine (PEI) as core and poly(styrene-co-2-ethylhexyl acrylate (P(St-EHA)) as shell. The resulting Pt@PEI@P(St-EHA), upon mixing with biphasic water and oil (a mixture of EHA and a dimethacrylate cross-linker in toluene), can self-assemble along the water/oil (W/O) interface and result in a stable emulsion. At W/O = 80/20 (volume ratio), a high internal phase emulsion (HIPE) forms and can be radically transformed into an open-cellular and elastic monolith termed Pt-polyHIPE, with PtNPs decorated on the surface. The Pt-polyHIPE is mechanically robust, and the cross-linking homogeneity by the dimethacrylate is responsible for the strength. The Pt-polyHIPE shows an active catalytic property, as evaluated by reduction of 4-nitrophenol. The material is conveniently and well recyclable, showing no decrease in catalytic activity at least within 20 cycles. Energy-dispersive X-ray spectra and thermogravimetric analysis also support sufficient retaining of the Pt species, where the multivalent and multiligand PEI should be responsible for this property.

A multifunctional azobenzene-based polymeric adsorbent for effective water remediation.

The efficient removal of trace carcinogenic organic pollutants, such as polycyclic aromatic hydrocarbons (PAHs) and ionic dyes, from water is an important technical challenge. We report a highly effective recyclable multifunctional azobenzene (AZ)-based silica-supported polymeric adsorbent which can simultaneously remove both PAHs and anionic dyes from water to below parts per billion (ppb) level based on multiple interactions such as the hydrophobic effect, π-π stacking and electrostatic interactions, thus providing a new strategy for designer water remediation materials.

Highly efficient separation, enrichment, and recovery of peptides by silica-supported polyethylenimine.

Highly efficient and charge-selective adsorption and desorption of peptides at trace level by a solid-phase adsorbent is described. The adsorbent of SiO2@PEI is synthesized by covalent immobilization of branched polyethylenimines (PEI) exclusively on the outer surface of the porous silica particles (∼300 µm). For aqueous peptides (Mw = 600-3000 Da), SiO2@PEI can capture the negatively charged ones and leave the positively charged ones intact, and by adjusting pH of the system peptides with different isoelectric points (pIs) can be well separated. Targeted peptide at low abundance (at least as low as 0.1 mol % with respect to the highest one) can be well separated. The association constants of K > 10(12) M(-1) at pH > pI and K < 10(4) M(-1) at pH < pI are found; that is, selectivity > 10(8) is generally available. Thus, a peptide even at sub-femtomolar level can be extracted and eluted for analysis, and efficient recovery (79-92%) of the peptides is found. The extraction is mainly promoted by multisite electrostatic interaction, and the hydrophilic and cationic properties of PEI at low pH play a unique role in desorption efficiency and selectivity. The unbiased nature of this method renders the adsorbent applicable to the efficient separation of a broad spectrum of peptides, including those with similar pIs.

Design of D-π-A type photoacid generators for high efficiency excitation at 405 nm and 800 nm.

New sulfonium salts with diphenylamino asymmetrically substituted stilbene as a D-π-A conjugated system have been synthesized. The resulting photoacid generators exhibit a highly efficient acid photogeneration process by either one-photon 405 nm or two-photon 800 nm excitation.

Adaptively deformed mesh based interface method for elliptic equations with discontinuous coefficients.

Mesh deformation methods are a versatile strategy for solving partial differential equations (PDEs) with a vast variety of practical applications. However, these methods break down for elliptic PDEs with discontinuous coefficients, namely, elliptic interface problems. For this class of problems, the additional interface jump conditions are required to maintain the well-posedness of the governing equation. Consequently, in order to achieve high accuracy and high order convergence, additional numerical algorithms are required to enforce the interface jump conditions in solving elliptic interface problems. The present work introduces an interface technique based adaptively deformed mesh strategy for resolving elliptic interface problems. We take the advantages of the high accuracy, flexibility and robustness of the matched interface and boundary (MIB) method to construct an adaptively deformed mesh based interface method for elliptic equations with discontinuous coefficients. The proposed method generates deformed meshes in the physical domain and solves the transformed governed equations in the computational domain, which maintains regular Cartesian meshes. The mesh deformation is realized by a mesh transformation PDE, which controls the mesh redistribution by a source term. The source term consists of a monitor function, which builds in mesh contraction rules. Both interface geometry based deformed meshes and solution gradient based deformed meshes are constructed to reduce the L(∞) and L(2) errors in solving elliptic interface problems. The proposed adaptively deformed mesh based interface method is extensively validated by many numerical experiments. Numerical results indicate that the adaptively deformed mesh based interface method outperforms the original MIB method for dealing with elliptic interface problems.